DIRECTIONS FOR USE: Snappi® fasteners must be used responsibly, and need to be used correctly in order to work effectively.
1. STRETCH the Snappi® fastener before its first use. The stretching triggers the 'memory' of the Snappi® to return to its original size, and in so doing, will pull the diaper together to the middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can be done by holding the Snappi® in the center with one hand, and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi® is now ready to go!
2. Make sure that the Snappi® is ATTACHED SECURELY. It is important that the Snappi® 'leg' being attached be stretched across the diaper before hooking it into the diaper. When attaching the Snappi®, hold onto the solid part of the tab. DO NOT pull on the loops. So,
Hook Left,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center
In other words, the Snappi® fastener should go from a ‘T’ shape to a ‘Y’ shape.
By following these instructions, the Snappi® should be secure and the diaper will fit snugly. ALWAYS place a cover over the diaper and Snappi® fastener.
Once stretched correctly, the Snappi® fastener gives an additonal 4” stretch across the width than the Size 1 Snappi®. It comfortably fits up to a 30” waist.
AGE RECOMMENDATION: Although this depends largely on the size and shape of the baby or toddler, we recommend using the Size 2 Snappi® for children aged 16 months+ AVAILABLE IN WHITE ONLY.
DIRECTIONS FOR USE: